The lamp has an LED lamp with 5 watts and the UV light has a wavelength within 395-405nm, it is within UV-A, which is considered harmless. The lamp comes with a foot pedal that is used to turn on the lamp. Place the lamp on the floor next to your treatment bench and then adjust the arm to get the lamp in the desired position and angle. Be sure to follow the advice on how to work safely with UV/LED!
- Position the lamp over the client’s lashes with a distance of 10-15 cm.
- Use UV glasses or comparable glasses with UV400 protection.
- Check that the lamp is correctly positioned over the area you want to work on. Adjust the lamp arm if necessary. The diameter of the light beam should be around 4 cm.
IS THE SYSTEM SAFE?
Our system is tested and safe! Before use, please read the instructions and safety precautions carefully.
- The light emitted by the lamp has a lower radiation level than sunlight and is safe to use for lash extension.
- The light is directed at the eyelash, not the skin.
- The emitted waves are the same as most LED skincare devices used in beauty salons.
- The lamp, materials and tools are tested and certified according to EU standards.
- Has all relevant safety documents.
- The effective time of activated light rarely exceeds 30 minutes as each lash only needs 1-2 seconds to harden.
Durability:
- If you experience problems with durability, it is most likely due to the application.
- Check the following points step by step to ensure the best possible durability.
- Remember to shake the glue for 30 seconds before treatment.
- Make sure the lamp is at a maximum distance of 15 cm from the lashes, 10 cm is recommended.
- Hold light long enough. To make sure you cure long enough, it is recommended that you start with 3 seconds until you get used to working with the system. Release the foot pedal only after counting to 3 seconds.
__________________
Responsible party: InBorn Beauty AB
Reviews
There are no reviews yet.